You don’t want to miss the only rotating
equipment and power generation event
organized by users for users.
September 10-13, 2007
George R. Brown Convention Center
Houston, TX
Monday, September 10
Short Courses 8 AM- 5 PM
Tuesday, September 11
Technical Sessions 8: 30 AM- 12 PM; 2 PM-3: 30 PM
Exhibits 3: 30 PM- 7 PM
Wednesday, September 12
Technical Sessions 8: 30 AM- 12 PM; 2 PM-3: 30 PM
Exhibits 3: 30 PM- 7 PM
Thursday, September 13
Technical Sessions 8: 30 AM- 12 PM
Exhibits 9: 30 AM- 12 PM
If you can’t make the show, check out these products on
the following pages that are being exhibited on the floor. They
are keys to the maintenance, performance, troubleshooting,
operation, and purchase of your rotating equipment:
Categories
Compressors...................... 77
Turbines.......................... 77
Drives............................ 78
Seals ............................ 79
Bearings.......................... 79
Couplings......................... 80
Vibration Monitoring & Alignment . . . . . . 80
Controls & Instrumentation . . . . . . . . . . . 81
Filters, Coatings, Recirculation . . . . . . . . 82
Short courses offered include information on centrifugal compressors, gas seals, risk and reliability assessment, gas
turbines, rotordynamic lateral and stability analyses, and aero
performance. Lectures, tutorials, and discussion groups will
give attendees the opportunity to discuss and learn about the
latest advances in turbomachinery.
While you’re there, be sure to stop by the Pumps & Systems
booth (#146) for the latest information about our magazine,
pump-zone.com, PumpCalcs.com, and e-newsletters.
