Pumps & Systems - September 2007

Series MPC Jr. Pump
Controller
The Mercoid MPC Junior is a low cost
alternating pump control perfect for less
demanding applications where all of the
features of the MPC are not needed.
Pump control is easy with the MPCJR,
just connect your process transmitter
and program the pump on/off points in
the scale range desired. The Junior fea-
tures local indication, integral power
supply for process transmitter, two
SPDT pump control contacts, two alarm
contacts, optional process retransmis-
sion, and optional Modbus^®communica-
tions.

$ 7^fr9^o.^m0 0
$ 3^f1^{r o}5^m. 0 0

Series 626/628 Industrial Pressure Transmitter Accuracies of 1% or 0.25% full scale. Industrial housing allows easy wiring and installation by removing top and piping conduit to the 1/2˝ female NPT. Optional valve depressor, as the process connection, is perfect for preventing refrigerant loss.

Modbus^®is a registered trademark of Schnieder Automation.

Series MPC Pump
Controller
The Mercoid MPC Pump
Controller is ideal to con-
trol, monitor, and protect
pump operations. There
are so many features in the
MPC that you can eliminate
many components from
your pump control system. The MPC is used
with any process transmitter and displays the
process in any user selectable scale range.
Included in the MPC is seal failure monitor-
ing for submersible pumps, pump over-tem-
perature monitoring, pump run time meters,
process simulation for test and calibration,
pump alternation, process retransmission,
integral process transmitter power supply,
and more!

$ 6^f0^{r o}0^m. 0 0
$ 2^fr4^o3^m. 7 5

Series V4 FLOTECT® Vane
Operated Flow Switch
The W. E. Anderson V4 flow switch is
ideal for flow proving in large size pipes.
Never worry about leaks since the V4
features a solid bar stock body with no
linkage or wearing parts that will create
flow points. The switch mechanism can
even be replaced without taking the body
out of the process so that you don’t have
to shut down and drain the line. A five
vane paddle allows selectability of
switching point in 1-1/2” pipe size and
up. The V4 is weatherproof, explosion-
proof, and rated to 5000 psig.

Series SBLT2 & PBLT2

Submersible Level Transmitter

Mercoid offers a complete line of sub-

mersible level transmitters. The SBLT2

is a slim bullet nose design perfect for clean water applications while the PBLT2 is made with a non-clogging diaphragm for sludge and slurries. Both units are constructed of 316 SS bodies, have lighting surge protection, and feature .25% accuracy. The PBLT2 also features a stand off plate so that it can be dropped into a lift station without suspending it on the cable.

$ 3^f5^{r o}0^m. 0 0
$ f6r ₁o4m_.0 0

Series UV Ultra-View ^TMPolysulfone Flowmeter
The UV is a robust industrial flow meter
with laboratory grade accuracy and wet-
ted parts. The +/-2% full scale accuracy
UV contains no metal wetted parts, mak-
ing it ideal for usage with chemicals com-
patible with Polysulfone, Fluoroelastomer
and PTFE. Dual scales in a variety of
ranges with high temperature and pres-
sure ratings makes the UV the perfect
flowmeter for ultra-pure water or chemi-
cal applications in water treatment
plants.